Skip to content

Smart EV Chargers

EVSE for Home & Office – Made in the UK  

Zappi intelligent electric vehicle charger enables you to charge your electric car with surplus energy generated from your PV panels or other renewable sources.

Zappi has 3 charge modes, the cleverest being our ECO & ECO+ modes, which maximize the effectiveness of your microgeneration system. You can charge your car with surplus energy, enjoy a full graphic display, and view listings of your savings from the date of installation.
If you don’t yet have solar panels or a wind turbine, Zappi can work like any other EVSE, so if/when you do get a micro-generation system installed you’re ready to go.


Microgeneration systems such as Solar PV and small wind turbines are at their most efficient when the generated energy is consumed on-site rather than exporting it to the grid. This is what we call ‘self-consumption.
Zappi is a Mode 3 charging station, compatible with all-electric vehicles and plug-in hybrids that comply with SAE J1772, EN62196, and EN61851 plug-in electric vehicle standards.
Zappi works like any regular charging point but has special eco charging modes that will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation.

Two special ECO charging modes automatically adjust charging current in response to on-site generation and household power consumption. In FAST charge mode, Zappi operates like an ordinary EV charging.
A grid current sensor (supplied) simply clips around the incoming supply cable. This sensor is used to monitor excess power and when using the special ECO charge modes, Zappi automatically adjusts the charge rate in response to available surplus.

Zappi EVSE is made in the UK.


  • • Type 1 or Type 2 connector (Subject to availability)
  • • 3 charging modes: ECO, ECO+ & FAST
  • • Optimises microgeneration self-consumption
  • • Works with solar PV or wind turbine systems
  • • Economy tariff sense input
  • • Programmable timer function
  • • Charge and event logging
  • • Remote control and monitoring add-on option
  • • Pin-code lock function
  • • Tap operated display backlight
  • • Built-in RCD protection
  • • Integral cable holster
  • • Supplied with clip-on grid current sensor

The Zappi Made in the UK intelligent charger is priced at LKR 350,000.

Call 0777 007 139 to know more information and installations.

Rated Power7kW (1-ph) or 22kW (3-ph)
Rated Supply Voltage230V AC Single Phase or 400V AC 3-phase (+/- 10%)
Supply Frequency50 Hz
Rated Current32A max
Standby Power Consumption3W
Integral Earth Leakage Protection Integral30mA Type A RCD + 6mA DC protection (EN 62955)
Economy Tariff SenseInput 230V AC sensing (4.0kV isolated)
Tethered Cable Length6.5 Meters

Installation Info:

Circuit Breaker 32A Curve B
Earthing Arrangement TN: can be connected to the PME supply.

Complies with BS 7671:2018-amd1:2020
Compliance LVD 2014/35/EU, EMC 2014/30/EU, EN 62196-2:2017, IEC 62955:2018, ROHS 2011/65/EU, CE Certified EN 61851-1:2019*

  • -T variant is fully compliant with EN 61851-1:2019
    Zappi versions that do not have the -T suffix comply with EN 61851-1:2019 with the exception of Clause 8.4 in order to meet the requirements of BS 7671:2018 Amendment 1:2020 which requires the protective earth conductor to be switched in order to provide protection against a damaged PEN conductor in a TN-C-S earthed electrical system

1 thought on “Smart EV Chargers”

Leave a Reply

Your email address will not be published. Required fields are marked *